[srsran-users] Failed cell selection procedure: 5G SA srsRAN E2E with UE(B210) gNB(N310)

[Anup Bhattacharjee]

Hey Andrea and community,

Thank you for your reply.

I changed the srate to 11.52e6 but the issue remains.

Not sure what may be going wrong.

Any other things that I could try to debug this issue? Or if someone else has faced a similar issue in past?

Best Regards,

Anup Bhattacharjee
TU Delft

________________________________
From: Andrea Paci <andrea.paci1998 at gmail.com>
Sent: Tuesday, December 27, 2022 7:37 PM
To: Anup Bhattacharjee <anup.kiran at outlook.com>
Subject: Re: [srsran-users] Failed cell selection procedure: 5G SA srsRAN E2E with UE(B210) gNB(N310)

Hello,

I had a similar issue and I solved specifying a sample rate of 11.52e6 instead of 23.04e6 in the device args of both UE and eNB.

Cheers,
Andrea Paci



Il giorno 23 dic 2022, alle ore 10:54, Anup Bhattacharjee <anup.kiran at outlook.com> ha scritto:


Hello srsRAN team and fellow community members,

I am facing some issues with the following:

I have tried the srsRAN gNB with EVB from Quectel (RM500Q-AE) and it is working with open5GS as 5GC.
Now, I am trying to setup an E2E setup with srsRAN for 5G SA with open5GS as 5GC.

I am using a B210 for UE SDR and a N310 for gNB SDR.

It seems that the UE cell selection procedure is not successful. In the UE log the following message comes:
"[RRC-NR ] [I] Proc "Cell Selection" - Completed with failure."

Note: The installation of srsRAN went smoothly with all the test passing.

PFA cfg and log files.

May I know where I may be going wrong?

Kind Regards,
Anup
TU Delft


<enb.log>
<rr.conf>
<ue.conf>
<ue.log>
<enb.conf>
_______________________________________________
srsran-users mailing list
srsran-users at lists.srsran.com
https://lists.srsran.com/mailman/listinfo/srsran-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230109/c260052b/attachment.htm>