[srsran-users] install from source on Kali

[Brendan McAuliffe]

Hi Rob,

Can you give me some more information:

   - Am I correct in saying this is a 4G scenario?
   - Are you running with sudo?
   - Have you tried to connect srsUE and srsENB using USRPs prior to
   testing with the phone?
   - Have you tested that the USRP is working with commands like
   uhd_find_devices?

It is best to always share your configs and logs when asking for help with
set-ups like this.

Apologies for the delayed response.

Best regards,
Brendan

On Fri, 24 Feb 2023 at 17:35, Rob Hahn <rhahn at alarm.com> wrote:

> Hey Brendan,
>
> I was able to get the software installed but I am not seeing the network
> from my UE. I noticed the following messages after eNodeB started.
>
> ==== eNodeB started ===
> Type <t> to view trace
> Setting frequency: DL=2680.0 Mhz, UL=2560.0 MHz for cc_idx=0 nof_prb=50
> [INFO] [UHD RF] Tx while waiting for EOB, timed out... 1.48842 >= 0.
> Starting new burst...
> [INFO] [UHD RF] Tx while waiting for EOB, timed out... 1.50138 >= 0.
> Starting new burst...
> [INFO] [UHD RF] Tx while waiting for EOB, timed out... 1.51525 >= 0.
> Starting new burst...
> [INFO] [UHD RF] Tx while waiting for EOB, timed out... 1.52902 >= 0.
> Starting new burst...
> [INFO] [UHD RF] Tx while waiting for EOB, timed out... 1.54286 >= 0.
> Starting new burst...
> [INFO] [UHD RF] Tx while waiting for EOB, timed out... 1.55661 >= 0.
> Starting new burst...
>
> When I looked on my usrpb205mini I noticed that the TX light was not on.
> Do you know if this message and the UE not seeing the network are related?
>
> I have a sysmocom SIM card that I programmed and inserted into my UE,
> which is an unlocked samsung galaxy s4. I added the SIM card details to
> user_db.csv. I also don't see any other errors in either srsenb and srsepc
> terminal outputs.
>
> Rob
> ------------------------------
> *From:* srsran-users <srsran-users-bounces at lists.srsran.com> on behalf of
> Rob Hahn <rhahn at alarm.com>
> *Sent:* Thursday, February 23, 2023 11:20 AM
> *To:* Brendan McAuliffe <brendan.mcauliffe at srs.io>
> *Cc:* srsran-users at lists.srsran.com <srsran-users at lists.srsran.com>
> *Subject:* Re: [srsran-users] install from source on Kali
>
>
> Thanks so much! I’ll give that a try.
>
>
>
> Rob
>
>
>
> *From:* Brendan McAuliffe <brendan.mcauliffe at srs.io>
> *Sent:* Thursday, February 23, 2023 10:59 AM
> *To:* Rob Hahn <rhahn at alarm.com>
> *Cc:* srsran-users at lists.srsran.com
> *Subject:* Re: [srsran-users] install from source on Kali
>
>
>
> Hi Rob,
>
> If you take a look at the cmake output, you will see the following:
>
>
>
> -- srsUE and srsENB/srsGNB builds disabled due to missing RF driver
>
>
>
> To ensure that srsUE and srsENB are built correctly you need to have an RF
> driver installed on your machine - this needs to be done *before *installing
> srsRAN. You can find a list of supported RF drivers here
> <https://docs.srsran.com/projects/4g/en/latest/general/source/1_installation.html#installation-from-source>
> in the documentation. Install one of these, double check you have all of
> the relevant dependencies, and try to build everything again.
>
> If the issue persists, let me know.
>
> Best regards,
> Brendan
>
>
>
> On Thu, 23 Feb 2023 at 16:45, Rob Hahn <rhahn at alarm.com> wrote:
>
> I printed the outputs these corresponding files.
>
>
>
> Thanks!
> ------------------------------
>
> *From:* Brendan McAuliffe <brendan.mcauliffe at srs.io>
> *Sent:* Thursday, February 23, 2023 9:46 AM
> *To:* Rob Hahn <rhahn at alarm.com>
> *Cc:* srsran-users at lists.srsran.com <srsran-users at lists.srsran.com>
> *Subject:* Re: [srsran-users] install from source on Kali
>
>
>
> Hi Rob,
>
> Can you share the output when you run cmake and make?
>
> Best regards,
> Brendan
>
>
>
> On Thu, 23 Feb 2023 at 15:42, Rob Hahn <rhahn at alarm.com> wrote:
>
> I installed srsran from source by following these instructions.
>
>
> https://docs.srsran.com/projects/4g/en/latest/general/source/1_installation.html
>
> I did not receive any errors and the installation was successful.
>
>
>
> However, I only see srsepc. It looks like srsenb wasn’t installed. Is this
> expected?
>
>
>
>
>
> _______________________________________________
> srsran-users mailing list
> srsran-users at lists.srsran.com
> https://lists.srsran.com/mailman/listinfo/srsran-users
>
>
>
>
> --
> Brendan McAuliffe
>
> User Success Associate
>
> Software Radio Systems, Ltd.
>
> brendan at srs.io
>
> www.srs.io
>
> Barcelona, Spain
>
> [image: twitter] <https://twitter.com/Brendan_SRS>
>
> [image: linkedin] <https://www.linkedin.com/in/bmcaulif/>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230307/42e61d4f/attachment-0001.htm>