[srsran-users] COTS UE connected to the network but can't access internet
SHI JIE SEAH
SSJ_SEAH1994 at hotmail.com
Thu Mar 30 15:12:43 UTC 2023
Hi all,
I have successfully connected my COTS UE to the corresponding network. I have also checked the network using netmonitor application in UE and it is connected. However, my COTS UE can’t access the internet (Google or play YouTube). I have configured IP routing at the EPC and added the APN to my phone (according to here<https://docs.srsran.com/en/latest/app_notes/source/cots_ue/source/index.html#cots-ue-appnote>).
My setup was listed as follows:
1x Raspberry pi as eNB
1x laptop with ubuntu 20.04 LTS running EPC and remotely controlled eNB via PUTTY
1x USRP B210 connect to raspberry pi
1x COTS UE (Samsung Galaxy S8+)
The screenshot of netmonitor output, EPC and eNB output, and configuration files are attached. A recording of COTS UE trying to play YouTube has also been attached here.
I hope someone can give me a solution to this problem. Much appreciated if you could provide me with a solution.
Thanks.
Seah
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: eNB output 1.png
Type: image/png
Size: 139772 bytes
Desc: eNB output 1.png
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: eNB output 2.png
Type: image/png
Size: 74974 bytes
Desc: eNB output 2.png
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0006.png>
-------------- next part --------------
#####################################################################
# srsENB configuration file
#####################################################################
#####################################################################
# eNB configuration
#
# enb_id: 20-bit eNB identifier.
# cell_id: 8-bit cell identifier.
# tac: 16-bit Tracking Area Code.
# mcc: Mobile Country Code
# mnc: Mobile Network Code
# mme_addr: IP address of MME for S1 connnection
# gtp_bind_addr: Local IP address to bind for GTP connection
# s1c_bind_addr: Local IP address to bind for S1AP connection
# n_prb: Number of Physical Resource Blocks (6,15,25,50,75,100)
# tm: Transmission mode 1-4 (TM1 default)
# nof_ports: Number of Tx ports (1 port default, set to 2 for TM2/3/4)
#
#####################################################################
[enb]
enb_id = 0x19B
cell_id = 0x01
phy_cell_id = 1
tac = 0x0001
mcc = 208
mnc = 92
mme_addr = 192.168.100.3
gtp_bind_addr = 192.168.100.2
s1c_bind_addr = 192.168.100.2
n_prb = 25
#tm = 4
#nof_ports = 2
#########################################################################
# eNB configuration files
#
# sib_config: SIB1, SIB2 and SIB3 configuration file
# note: when enabling mbms, use the sib.conf.mbsfn configuration file which includes SIB13
# rr_config: Radio Resources configuration file
# drb_config: DRB configuration file
#####################################################################
[enb_files]
sib_config = sib.conf
rr_config = rr.conf
drb_config = drb.conf
#####################################################################
# RF configuration
#
# dl_earfcn: EARFCN code for DL
# tx_gain: Transmit gain (dB).
# rx_gain: Optional receive gain (dB). If disabled, AGC if enabled
#
# Optional parameters:
# dl_freq: Override DL frequency corresponding to dl_earfcn
# ul_freq: Override UL frequency corresponding to dl_earfcn (must be set if dl_freq is set)
# device_name: Device driver family. Supported options: "auto" (uses first found), "UHD" or "bladeRF"
# device_args: Arguments for the device driver. Options are "auto" or any string.
# Default for UHD: "recv_frame_size=9232,send_frame_size=9232"
# Default for bladeRF: ""
# #time_adv_nsamples: Transmission time advance (in number of samples) to compensate for RF delay
# from antenna to timestamp insertion.
# Default "auto". B210 USRP: 100 samples, bladeRF: 27.
# burst_preamble_us: Preamble length to transmit before start of burst.
# Default "auto". B210 USRP: 400 us, bladeRF: 0 us.
#####################################################################
[rf]
dl_earfcn = 3625
tx_gain = 80
rx_gain = 40
#device_name = UHD
# For best performance in 2x2 MIMO and >= 15 MHz use the following device_args settings:
# USRP B210: num_recv_frames=64,num_send_frames=64
# For best performance when BW<5 MHz (25 PRB), use the following device_args settings:
# USRP B210: send_frame_size=512,recv_frame_size=512
device_args = auto
#time_adv_nsamples = auto
#burst_preamble_us = auto
#####################################################################
# MAC-layer packet capture configuration
#
# Packets are captured to file in the compact format decoded by
# the Wireshark mac-lte-framed dissector and with DLT 147.
# To use the dissector, edit the preferences for DLT_USER to
# add an entry with DLT=147, Payload Protocol=mac-lte-framed.
# For more information see: https://wiki.wireshark.org/MAC-LTE
#
# Please note that this setting will by default only capture MAC
# frames on dedicated channels, and not SIB. You have to build with
# WRITE_SIB_PCAP enabled in srsenb/src/stack/mac/mac.cc if you want
# SIB to be part of the MAC pcap file.
#
# enable: Enable MAC layer packet captures (true/false)
# filename: File path to use for packet captures
#####################################################################
[pcap]
enable = false
filename = /tmp/enb.pcap
#####################################################################
# Log configuration
#
# Log levels can be set for individual layers. "all_level" sets log
# level for all layers unless otherwise configured.
# Format: e.g. phy_level = info
#
# In the same way, packet hex dumps can be limited for each level.
# "all_hex_limit" sets the hex limit for all layers unless otherwise
# configured.
# Format: e.g. phy_hex_limit = 32
#
# Logging layers: rf, phy, phy_lib, mac, rlc, pdcp, rrc, gtpu, s1ap, all
# Logging levels: debug, info, warning, error, none
#
# filename: File path to use for log output. Can be set to stdout
# to print logs to standard output
# file_max_size: Maximum file size (in kilobytes). When passed, multiple files are created.
# If set to negative, a single log file will be created.
#####################################################################
[log]
all_level = warning
all_hex_limit = 32
filename = /tmp/enb.log
file_max_size = -1
[gui]
enable = false
#####################################################################
# Scheduler configuration options
#
# max_aggr_level: Optional maximum aggregation level index (l=log2(L) can be 0, 1, 2 or 3)
# pdsch_mcs: Optional fixed PDSCH MCS (ignores reported CQIs if specified)
# pdsch_max_mcs: Optional PDSCH MCS limit
# pusch_mcs: Optional fixed PUSCH MCS (ignores reported CQIs if specified)
# pusch_max_mcs: Optional PUSCH MCS limit
# #nof_ctrl_symbols: Number of control symbols
#
#####################################################################
[scheduler]
#max_aggr_level = -1
#pdsch_mcs = -1
#pdsch_max_mcs = -1
#pusch_mcs = -1
pusch_max_mcs = 16
nof_ctrl_symbols = 3
#####################################################################
# eMBMS configuration options
#
# enable: Enable MBMS transmission in the eNB
# m1u_multiaddr: Multicast addres the M1-U socket will register to
# m1u_if_addr: Address of the inteferface the M1-U interface will listen for multicast packets.
#
#####################################################################
[embms]
#enable = false
#m1u_multiaddr = 239.255.0.1
#m1u_if_addr = 127.0.1.201
#####################################################################
# Channel emulator options:
# enable: Enable/Disable internal Downlink/Uplink channel emulator
#
# -- Fading emulator
# fading.enable: Enable/disable fading simulator
# fading.model: Fading model + maximum doppler (E.g. none, epa5, eva70, etu300, etc)
#
# -- Delay Emulator delay(t) = delay_min + (delay_max - delay_min) * (1 + sin(2pi*t/period)) / 2
# Maximum speed [m/s]: (delay_max - delay_min) * pi * 300 / period
# delay.enable: Enable/disable delay simulator
# delay.period_s: Delay period in seconds.
# delay.init_time_s: Delay initial time in seconds.
# delay.maximum_us: Maximum delay in microseconds
# delay.minumum_us: Minimum delay in microseconds
#
# -- Radio-Link Failure (RLF) Emulator
# rlf.enable: Enable/disable RLF simulator
# rlf.t_on_ms: Time for On state of the channel (ms)
# rlf.t_off_ms: Time for Off state of the channel (ms)
#
# -- High Speed Train Doppler model simulator
# hst.enable: Enable/Disable HST simulator
# hst.period_s: HST simulation period in seconds
# hst.fd_hz: Doppler frequency in Hz
# hst.init_time_s: Initial time in seconds
#####################################################################
[channel.dl]
#enable = false
[channel.dl.fading]
#enable = false
#model = none
[channel.dl.delay]
#enable = false
#period_s = 3600
#init_time_s = 0
#maximum_us = 100
#minimum_us = 10
[channel.dl.rlf]
#enable = false
#t_on_ms = 10000
#t_off_ms = 2000
[channel.dl.hst]
#enable = false
#period_s = 7.2
#fd_hz = 750.0
#init_time_s = 0.0
[channel.ul]
#enable = false
[channel.ul.fading]
#enable = false
#model = none
[channel.ul.delay]
#enable = false
#period_s = 3600
#init_time_s = 0
#maximum_us = 100
#minimum_us = 10
[channel.ul.rlf]
#enable = false
#t_on_ms = 10000
#t_off_ms = 2000
[channel.ul.hst]
#enable = false
#period_s = 7.2
#fd_hz = -750.0
#init_time_s = 0.0
#####################################################################
# Expert configuration options
#
# pusch_max_its: Maximum number of turbo decoder iterations (Default 4)
# pusch_8bit_decoder: Use 8-bit for LLR representation and turbo decoder trellis computation (Experimental)
# nof_phy_threads: Selects the number of PHY threads (maximum 4, minimum 1, default 2)
# metrics_period_secs: Sets the period at which metrics are requested from the eNB.
# metrics_csv_enable: Write eNB metrics to CSV file.
# metrics_csv_filename: File path to use for CSV metrics.
# pregenerate_signals: Pregenerate uplink signals after attach. Improves CPU performance.
# tx_amplitude: Transmit amplitude factor (set 0-1 to reduce PAPR)
# link_failure_nof_err: Number of PUSCH failures after which a radio-link failure is triggered.
# a link failure is when SNR<0 and CRC=KO
# max_prach_offset_us: Maximum allowed RACH offset (in us)
# eea_pref_list: Ordered preference list for the selection of encryption algorithm (EEA) (default: EEA0, EEA2, EEA1).
# eia_pref_list: Ordered preference list for the selection of integrity algorithm (EIA) (default: EIA2, EIA1, EIA0).
#
#####################################################################
[expert]
#pusch_max_its = 8 # These are half iterations
#pusch_8bit_decoder = false
#nof_phy_threads = 3
#metrics_period_secs = 1
#metrics_csv_enable = false
#metrics_csv_filename = /tmp/enb_metrics.csv
#pregenerate_signals = false
#tx_amplitude = 0.6
#link_failure_nof_err = 50
#rrc_inactivity_timer = 60000
#max_prach_offset_us = 30
#eea_pref_list = EEA0, EEA2, EEA1
#eia_pref_list = EIA2, EIA1, EIA0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EPC output 1.png
Type: image/png
Size: 174293 bytes
Desc: EPC output 1.png
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0007.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EPC output 2.png
Type: image/png
Size: 178656 bytes
Desc: EPC output 2.png
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0008.png>
-------------- next part --------------
#####################################################################
# srsEPC configuration file
#####################################################################
#####################################################################
# MME configuration
#
# mme_code: 8-bit MME code identifies the MME within a group.
# mme_group: 16-bit MME group identifier.
# tac: 16-bit Tracking Area Code.
# mcc: Mobile Country Code
# mnc: Mobile Network Code
# full_net_name Display Name of the Network
# short_net_name Short Display Name of the Network
# apn: Set Access Point Name (APN)
# mme_bind_addr: IP bind addr to listen for eNB S1-MME connnections
# dns_addr: DNS server address for the UEs
# encryption_algo: Preferred encryption algorithm for NAS layer
# (supported: EEA0 (default), EEA1, EEA2, EEA3)
# integrity_algo: Preferred integrity protection algorithm for NAS
# (supported: EIA0 (rejected by most UEs), EIA1 (default), EIA2, EIA3
paging_timer: Value of paging timer in seconds (T3413)
# request_imeisv: Request UE's IMEI-SV in security mode command
# lac: 16-bit Location Area Code.
#
#####################################################################
[mme]
mme_code = 0x1a
mme_group = 0x0001
tac = 0x0001
mcc = 208
mnc = 92
mme_bind_addr = 192.168.100.3
apn = test4g
dns_addr = 8.8.8.8
encryption_algo = EEA0
integrity_algo = EIA1
paging_timer = 2
request_imeisv = false
lac = 0x0006
#####################################################################
# HSS configuration
#
# db_file: Location of .csv file that stores UEs information.
#
#####################################################################
[hss]
db_file = user_db.csv
#####################################################################
# SP-GW configuration
#
# gtpu_bind_addr: GTP-U bind address.
# sgi_if_addr: SGi TUN interface IP address.
# sgi_if_name: SGi TUN interface name.
# max_paging_queue: Maximum packets in paging queue (per UE).
#
#####################################################################
[spgw]
gtpu_bind_addr = 192.168.100.3
sgi_if_addr = 172.16.0.1
sgi_if_name = srs_spgw_sgi
max_paging_queue = 100
####################################################################
# PCAP configuration
#
# Packets are captured to file in the compact format decoded by
# the Wireshark s1ap dissector and with DLT 150.
# To use the dissector, edit the preferences for DLT_USER to
# add an entry with DLT=150, Payload Protocol=s1ap.
#
# enable: Enable or disable the PCAP.
# filename: File name where to save the PCAP.
#
####################################################################
[pcap]
enable = false
filename = /tmp/epc.pcap
####################################################################
# Log configuration
#
# Log levels can be set for individual layers. "all_level" sets log
# level for all layers unless otherwise configured.
# Format: e.g. s1ap_level = info
#
# In the same way, packet hex dumps can be limited for each level.
# "all_hex_limit" sets the hex limit for all layers unless otherwise
# configured.
# Format: e.g. s1ap_hex_limit = 32
#
# Logging layers: nas, s1ap, mme_gtpc, spgw_gtpc, gtpu, spgw, hss, all
# Logging levels: debug, info, warning, error, none
#
# filename: File path to use for log output. Can be set to stdout
# to print logs to standard output
#####################################################################
[log]
all_level = info
all_hex_limit = 32
filename = /tmp/epc.log
#nas_level = debug
#s1ap_level = debug
#mme_gtpc_level = debug
#spgw_gtpc_level = debug
#gtpu_level = debug
#spgw_level = debug
#hss_level = debug
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IP routing.png
Type: image/png
Size: 135495 bytes
Desc: IP routing.png
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0009.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Netmonitor app.jpg
Type: image/jpeg
Size: 216443 bytes
Desc: Netmonitor app.jpg
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: COTS UE.mp4
Type: video/mp4
Size: 34209151 bytes
Desc: COTS UE.mp4
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0001.mp4>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Access point.jpeg
Type: image/jpeg
Size: 52325 bytes
Desc: Access point.jpeg
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0003.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SIM Card manager.jpeg
Type: image/jpeg
Size: 61581 bytes
Desc: SIM Card manager.jpeg
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0004.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SIM Card manager 2.jpeg
Type: image/jpeg
Size: 66692 bytes
Desc: SIM Card manager 2.jpeg
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230330/3706bc44/attachment-0005.jpeg>
More information about the srsran-users
mailing list