[srsran-users] srsRAN 4G with ZMQ When EPC and eNB are Separated
Iman Mohammadi
iman.mohammadi.telecom at gmail.com
Fri Mar 31 09:22:50 UTC 2023
Hi,
For "enb.gtp_bind_addr" and "enb.s1c_bind_addr" , you should specify IP
address of eNB VM, those addresses are for eNB not for EPC.
Best Regards
Iman Mohammadi
Mobile: +989354019601
On Fri, Mar 31, 2023, 12:28 Chao-Hwa Chen <chaohwa at gmail.com> wrote:
> Hi all,
>
> I would like to have EPC and eNB with different Linux hosts. I followed
> the suggestion (see
> https://lists.srsran.com/pipermail/srsran-users/2019-June/002674.html).
> At the EPC side, I type
> ./srsepc/src/srsepc --mme.mme_bind_addr=(EPC host IP)
> --spgw.gtpu_bind_addr=(EPC host IP)
>
> At the eNB side, I type
> ./srsenb/src/srsenb --rf.device_name=zmq
> --rf.device_args="fail_on_disconnect=true,tx_port=tcp://*:2000,rx_port=tcp://(UE
> host IP):2001,id=enb,base_srate=23.04e6" --enb.mme_addr=(EPC host IP)
> --enb.gtp_bind_addr=(EPC host IP) --enb.s1c_bind_addr=(EPC host IP)
>
> There is no connection reaction from the EPC side and at the eNB, it shows
> the following:
> Built in Release mode using commit 00c972ac4 on branch master.
>
> bind(): Cannot assign requested address
> Failed to bind on address (EPC host IP), port 2152: Cannot assign
> requested address
> Error initializing EUTRA stack.
> Opening 1 channels in RF device=zmq with
> args=fail_on_disconnect=true,tx_port=tcp://*:2000,rx_port=tcp://(UE host
> IP):2001,id=enb,base_srate=23.04e6
> Supported RF device list: soapy zmq file
> CHx base_srate=23.04e6
> CHx id=enb
> Current sample rate is 1.92 MHz with a base rate of 23.04 MHz (x12
> decimation)
> bind(): Cannot assign requested address
> CH0 rx_port=tcp://(UE host IP):2001
> CH0 tx_port=tcp://*:2000
> CH0 fail_on_disconnect=true
>
> How should I fix this issue?
>
> Thanks a lot in advance.
>
> Best Regards,
>
> Chao-Hwa
> _______________________________________________
> srsran-users mailing list
> srsran-users at lists.srsran.com
> https://lists.srsran.com/mailman/listinfo/srsran-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230331/84887730/attachment.htm>
More information about the srsran-users
mailing list