[srsran-users] [EXT] Re: Handover command

[Hashemi Natanzi, Seyed Bagher]

Dear Justin,

Thanks for your reply,

Other than E2 and O-RAN, I have configured my network in SRSRAN with 5 UE. Is it possible to just control the handover part of SRSRAN? For clarity, I have a function that sends a parameter, for example, which UE which cell or which eNodb/gNodb to SRSRAN for handover. In order to implement my research paper, I need to work on this part of SRSRAN. Your advice would be greatly appreciated.

BR,
Hashemi

From: Justin Tallon <justin.tallon at srs.io>
Sent: Thursday, November 2, 2023 6:14 AM
To: Hashemi Natanzi, Seyed Bagher <snatanzi at wpi.edu>
Cc: srsran-users at lists.srsran.com
Subject: [EXT] Re: [srsran-users] Handover command

Hi Hashemi,

We don't currently support any e2 parameters related to handover, if you would like to see a particular parameter supported in the code, refer to the relevant document (e2sm-kpm) attached, find the parameter you are interested in and reference it here, we will then consider adding it for the next release.

Regards,
Justin

Justin Tallon

Engineering Manager

Software Radio Systems
[https://www.srs.io/wp-content/uploads/signatures/email-icon-2x.png]
justin at srs.io<mailto:justin at srs.io>
[https://www.srs.io/wp-content/uploads/signatures/link-icon-2x.png]
www.srs.io<https://www.srs.io/>
[https://www.srs.io/wp-content/uploads/signatures/address-icon-2x.png]
Barcelona, Spain
[https://www.srs.io/wp-content/uploads/signatures/LogoSRSsmall.png]
[twitter]<https://twitter.com/srssystems>
[linkedin]<https://www.linkedin.com/in/justin-tallon-71807136/>


On Thu, Nov 2, 2023 at 11:09 AM Hashemi Natanzi, Seyed Bagher <snatanzi at wpi.edu<mailto:snatanzi at wpi.edu>> wrote:
Dear SRSran users,

Hi,

Currently, I am developing a traffic steering Xapp for an O-RAN testbed. If the traffic steering made a decision to handover the user between my cell or eNodb or gNodb, it should send a handover command to my SRSRAN. How do I do that? In this case, how can I control SRSRAN? How do I send a handover command? Do you have a list of commands?

Thanks,

Br,
Milad
_______________________________________________
srsran-users mailing list
srsran-users at lists.srsran.com<mailto:srsran-users at lists.srsran.com>
https://lists.srsran.com/mailman/listinfo/srsran-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20231102/83f92fe6/attachment-0001.htm>