[srsran-users] Issues with Running srsENB on USRP E310

[Alin Stoica]

UHD Installation: I have installed UHD version 4.5.0. I compiled and
installed UHD directly from the source code available on GitHub.

USRP Firmware and Software: The USRP device is running the same version of
UHD (4.5.0).

Despite following the installation instructions, I am encountering the same
error across different setups. I even tested this on a laptop with a native
Linux installation to rule out any system-specific issues, but the error
persists. On the native machine the UHD was installed from the packet
manager(version 4.5.0), also the srsRAN is built from the source.


În lun., 13 nov. 2023 la 13:44, Mihai Idu <idumihai16 at gmail.com> a scris:

> Hey Alin,
>
> Just to confirm that we are on the same page. You've installed the UHD
> from here <https://files.ettus.com/manual/page_install.html>:
>
> Installation on LinuxUsing your package manager
>
> Most distributions provide UHD as part of their package management. On
> Debian and Ubuntu systems, this will install the base UHD library, all
> headers and build-specific files, as well as utilities:
>
> sudo apt-get install libuhd-dev uhd-host
>
>
> Using binaries provided by Ettus Research
>
> We provide UHD binary installers for Ubuntu and Fedora users for every
> stable release. Typically, we will provide binaries for latest two LTS
> versions of Ubuntu, and for the latest two versions of Fedora. Live
> CD/DVD/USBs are not supported.
>
> The latest versions of these binaries can be downloaded from here:
> http://files.ettus.com/binaries/uhd_stable/latest_release/
> Ubuntu
>
> Copy and paste these commands into your terminal. This will install UHD
> software as well as allow you to receive package updates.
>
> sudo add-apt-repository ppa:ettusresearch/uhd
> sudo apt-get update
> sudo apt-get install libuhd-dev uhd-host
>
>
>  and load the drivers on the USRP?
>
> Would you be kind enough to share the configuration files?
>
> Thank you,
> Mihai
>
>
> On Mon, Nov 13, 2023 at 11:34 AM Alin Stoica <alinstoica1234567 at gmail.com>
> wrote:
>
>> Hello everyone!
>>
>> I am encountering a persistent issue while attempting to run srsenb with
>> a USRP E310 device. The process starts normally, but I consistently face a
>> timeout error during control operations and issues with the End of Burst
>> (EOB) signal. The specific error message is: [ERROR] [UHD RF] RfnocError:
>> OpTimeout: Control operation timed out waiting for ACK followed by [INFO]
>> [UHD RF] Tx while waiting for EOB, timed out... 6.46538 >= 0. Starting new
>> burst....
>>
>> Setup Details:
>> Operating System: Ubuntu 22.04(WSL)
>> Hardware: USRP E310
>> srsRAN Version: Version 23.4.0
>> UHD (USRP Hardware Driver) Version: 4.5.0.0-0-g471af98f
>> MPM Version: 5.3
>> FPGA Version: 6.1
>> FPGA git hash: a2a04e3.clean
>> Time sources: internal, external, gpsdo
>> Clock sources: internal
>> Sensors: ref_locked, gps_locked, temp_fpga, temp_mb, gps_gpgga, gps_sky,
>> gps_time, gps_tpv
>> RF Front-end:
>> RX Frontend: 0
>> Name: E3xx
>> Antennas: RX2, TX/RX
>> Freq range: 70.000 to 6000.000 MHz
>> Gain range PGA: 0.0 to 76.0 step 1.0 dB
>> Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz
>> Connection Type: IQ
>> Uses LO offset: No
>>
>> I have tried various configurations and parameters, including adjusting
>> the master clock rate, but the issue persists. I am seeking advice on
>> optimal settings for the USRP E310 in the context of srsENB, particularly
>> regarding the handling of control operations and EOB signals. Any insights
>> into the compatibility between srsRAN and UHD versions or specific
>> performance settings for the USRP E310 would be highly appreciated.
>>
>> [image: image.png]
>>
>> _______________________________________________
>> srsran-users mailing list
>> srsran-users at lists.srsran.com
>> https://lists.srsran.com/mailman/listinfo/srsran-users
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20231113/e11a09c2/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 157412 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20231113/e11a09c2/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: configuration files.zip
Type: application/x-zip-compressed
Size: 21249 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20231113/e11a09c2/attachment-0001.bin>