[srsran-users] 回复: Could not set RX rate to 11.520 MHz. Actual rate is 11.703 MHz

[ZHUANG Yufan]

Dear Xavire and Pablo,

Thank you very much for your help.

May I ask how to check the running bandwidth of eNB? I use the default configuration file of eNB and PRB=50.

It seems taht the current version of srsran does not use the standard LTE rate even if I built with '-DUSE_LTE_RATES=ON'. Then I use release_20_10 and it works well with my device.

Sincerely,
Yufan
________________________________
发件人: Xavier Arteaga <xavier.arteaga at srs.io>
发送时间: 2024年5月29日 17:16
收件人: ZHUANG Yufan <yufan.zhuang at connect.ust.hk>
抄送: srsran-users at lists.srsran.com <srsran-users at lists.srsran.com>
主题: Re: [srsran-users] Could not set RX rate to 11.520 MHz. Actual rate is 11.703 MHz

Hi Yufan,
Are you running a 10MHz bandwidth eNb?

My comments:
- make sure it recompiles after setting `-DUSE_LTE_RATES=ON`;
- `base_srate=30.72e6` has no effect; and
- append `master_clock_rate=245.76e6` to the RF device arguments.

Kind regards,
Xavier

On Wed, 29 May 2024 at 09:49, ZHUANG Yufan <yufan.zhuang at connect.ust.hk<mailto:yufan.zhuang at connect.ust.hk>> wrote:
Dear team,

When I ran srsenb, I encountered the following warning and the srsenb cannot start.

[WARNING] [MULTI_USRP] Could not set RX rate to 11.520 MHz. Actual rate is 11.703 MHz
[WARNING] [0/DDC#0] The requested decimation is odd; the user should expect passband CIC rolloff.
Select an even decimation to ensure that a halfband filter is enabled.
Decimations factorable by 4 will enable 2 halfbands, those factorable by 8 will enable 3 halfbands.
decimation = dsp_rate/samp_rate -> 21

I have added "-DUSE_LTE_RATES=ON" when building srsran, and added "base_srate=30.72e6" in the enb configuration file. My device is USRP X410.

It seems that my srsenb does not use standard LTE rate. How to set this?

I highly appreciate your help. Looking forward to your reply.

Sincerely,
Yufan
_______________________________________________
srsran-users mailing list
srsran-users at lists.srsran.com<mailto:srsran-users at lists.srsran.com>
https://lists.srsran.com/mailman/listinfo/srsran-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20240529/4bd88d0b/attachment-0001.htm>